$ guides · 5 min read
How to watch IPTV on your TV from your Android phone
You can watch your playlist on the TV without cables, with Chromecast or, on Smart TVs without Cast, through a DLNA app. Here's how to set it up and what to check when it doesn't work.
Quick steps
- Same Wi-FiConnect the phone and the Chromecast or Google TV to the same Wi-Fi network.
- Start the channelOpen a channel or a movie in Varpa.
- Tap CastTap the Cast icon in the player and choose your TV. The phone becomes the remote.
Three ways to get IPTV on the TV
- Chromecast / Google Cast: the easiest. It works with a Chromecast, Google TV, most Android TVs and many Smart TVs with Cast built in.
- DLNA: for Smart TVs without Cast, such as many Samsung and LG models. The phone passes the stream to a DLNA app, which sends it to the TV.
- An app on the TV: if your TV runs Android TV or Google TV you can install a player there and leave the phone out of it.
Chromecast: step by step
- Put the phone and the Chromecast on the same Wi-Fi. Guest networks and some routers block devices from seeing each other.
- Start a channel or movie in Varpa.
- Tap the Cast icon in the player and choose the TV.
- Use the phone as the remote: pause, seek, volume. You can lock it or browse the guide meanwhile.
With Cast the phone does not stream the video: it tells the TV which address to play, and the TV downloads it directly. That is good for battery and quality, but it also explains most problems below.
DLNA for Smart TVs without Cast
- Install a DLNA sender app from Google Play that works with your TV brand.
- In Varpa, open the channel and choose to open the stream in the DLNA app.
- Pick your TV in the DLNA app.
When casting does not work
- The TV does not appear: check the Wi-Fi network, turn off any VPN on the phone for a moment, and restart the Chromecast.
- It connects but the video does not start: some servers accept only the device that logged in, or need special headers that a TV cannot send. Try another channel: if some work and others don't, it is the source.
- Audio but no video, or the reverse: the TV may not support that codec (for example HEVC on older Chromecasts, or AC-3 audio on some TVs). On the phone Varpa has its own AC-3/E-AC-3 decoder, but the TV relies on its own.
- Stuttering only on the TV: the Chromecast is farther from the router than the phone. Move it, use a 5 GHz network or an Ethernet adapter. More in fixing buffering.
Questions
Why does a channel play on the phone but not on the TV?
The TV downloads the stream itself. Some servers allow only one IP or need special headers, and some TVs cannot decode certain codecs. Try another channel to tell the two apart.
Can I use my phone while casting?
Yes. With Chromecast the TV plays the stream on its own, so you can browse the guide or lock the phone.